PCM4.3 模拟量输出模块 DEIF
PCM4.3 模拟量输出模块 DEIF
PCM4.3 双时钟自动校准：复杂电磁干扰，设备正常运行
双看门狗设计：确保系统运行过程死机驱动直流有刷、音圈电机
四象限再生运行
DIP开关选择控制模式：电流（转矩），电压，速度，模拟量位置环
可调整电流限制
高性能、高动态响应
±10V模拟量差分输入接口
数字报警输出
自带测试可调电位器试运行伺服系统
偏移量可调电位器调整漂移
模拟参考量输入增益可调整
LED监控驱动器状态
电流输出监控
限位开关输入使能或禁止旋转方向
±60V测速发电机（tachometer）模拟量反馈接口
全贴片工艺生产、高可靠性
直接替代美国AMC公司同
产品名称: C-7052D
产品介绍: 8路隔离数字量输入模块（带LED显示）。
产品特点:
C-7052D产品具有内置的微处理器和坚固的工业级塑料外壳，被广泛的应用于各种工业环境。
安全性高，模块自带双看门狗，保障系统通讯安全可靠。
通用性好，内置485专用自适应芯片，方便组网连接。
性能优良，内部有3000VDC隔离。
使用方便，可以非常容易的和常见的SCADA/ HMI以及PLC软件进行通讯。
快速组网，仅需要两根通讯信号线就可以建立起一个多点的分布式RS-485网络。
PCM4.3 Dual clock automatic calibration: complex electromagnetic interference and normal operation of the equipment
Double watchdog design: ensure that the system will never crash during operation, and drive DC brush and voice coil motors
Four quadrant regeneration operation
Dip switch selects control mode: current (torque), voltage, speed, analog quantity, position loop
Adjustable current limit
High performance and dynamic response
± 10V analog differential input interface
Digital alarm output
Commissioning servo system with test adjustable potentiometer
Offset adjustable potentiometer to adjust drift
Analog reference input gain adjustable
LED monitor driver status
Current output monitoring
Limit switch input enable or disable rotation direction
± 60V tachometer analog quantity feedback interface
Full chip process production, high reliability
Directly replace American AMC company
Product Name: C-7052D
Product introduction: 8-way isolated digital input module (with LED display).
Product features:
C-7052d products are widely used in various industrial environments with built-in microprocessor and solid industrial grade plastic shell.
High security. The module is equipped with double watchdog to ensure the safe and reliable communication of the system.
Good versatility, built-in 485 special adaptive chip to facilitate networking connection.
Excellent performance, 3000vdc isolation inside.
It is easy to use and can easily communicate with common SCADA / HMI and PLC software.
Fast networking, only two communication signal lines can establish a multi-point distributed RS-485 network.
